General
Where are you located? Our main factory is located on the Sunshine Coast, Australia, but also distribute from Keswick, Canada.
Where are your products made? Over 90% of all our products are built in-house at our Sunshine Coast factory. This includes our carbon fibre aerobars, bar adaptors, accessories, and 3D printed products such as storage boxes and bottle cage mounting system. *3D printed products shipped to Canada, US and the America's are produced in our Canadian 3D printing hub.
How much is shipping? Shipping is free for all our aerobars and offer free shipping >$200 to most parts of the World. For more info see our shipping and returns page.
Tribar Syst3m
Installation
What bikes do the aerobars fit? The DYAD Tribar Syst3m will fit any bike where the two extension posts are within 80-140mm width left-right (from our research we haven't found a dual post bike they won't fit). The UNO Tribar Syst3m will fit any mono/single post bike such as Canyon Speedmax, 2025 Giant Trinity, Scott Plasma 6, Cervelo TT bikes with mono riser posts.
Do I need to buy an adaptor to fit the aerobars to my bike? Not often. The DYAD tribars can easily be mounted to most bikes existing extension posts or aftermarket adaptable angled risers. We also manufacture lightweight and aerodynamic adaptors for optimal angled and extended reach where necessary. The UNO tribars are provided with lightweight adaptors.
What bolt hole configurations do the aerobars fit? Both aerobars feature a blank carbon fibre mounting plate/area and shipped with a mounting guide for precision drilling. This allows for easy mounting without the need of additional bolt spacing adaptors whilst optimising rider position. Multiple positions are able to be achieved including swapping from one bike to another.
Hydration system
What is the hydration capacity of the integrated bottle? The bottles hold 1.25-1.5L depending on aerobar size.
Can I wash the integrated bottle? Yes. The aerobars package includes a specific cleaning brush for the bottle. We recommend ensuring you always rinse and allow the bottle to dry after every use and regularly use anti-bacterial bottle cleaning tabs.
Is the integrated bottle dishwasher safe? No. Please only clean the bottle with cool/room temperature water.
Is the bottle safe to drink from? Yes. The bottle is produced using high-temperature FDA approved food safe filaments and printing procedures. The bottle is then sealed using a FDA approved food safe resin. Together this ensures a high-quality finish and extends lifespan.
Can you refill the bottle during a race? Yes. The integrated bottle features an easy access tab at the front for easy refilling.
What are the purchase choices associated with the bottle? The integrated bottle has several different configuration options available. The main option is whether you'd like the hose on the left or right side of the bottle. We recommend choosing the side that you most often hold a water bottle with whilst drinking during a ride. The dual hose option is for those with bikes with an internal hydration bladder or similar that you drink with from a hose. The dual hose option then allows you to route that hose up into the integrated bottle on the opposite side to the integrated bottle's hose.
Can I order spare parts for the bottle? Yes. We offer spares for the integrated bottle including hose, connector, easy access tab and magnetic hose guides as well as the bottle itself.
Where are you located? Our main factory is located on the Sunshine Coast, Australia, but also distribute from Keswick, Canada.
Where are your products made? Over 90% of all our products are built in-house at our Sunshine Coast factory. This includes our carbon fibre aerobars, bar adaptors, accessories, and 3D printed products such as storage boxes and bottle cage mounting system. *3D printed products shipped to Canada, US and the America's are produced in our Canadian 3D printing hub.
How much is shipping? Shipping is free for all our aerobars and offer free shipping >$200 to most parts of the World. For more info see our shipping and returns page.
Tribar Syst3m
Installation
What bikes do the aerobars fit? The DYAD Tribar Syst3m will fit any bike where the two extension posts are within 80-140mm width left-right (from our research we haven't found a dual post bike they won't fit). The UNO Tribar Syst3m will fit any mono/single post bike such as Canyon Speedmax, 2025 Giant Trinity, Scott Plasma 6, Cervelo TT bikes with mono riser posts.
Do I need to buy an adaptor to fit the aerobars to my bike? Not often. The DYAD tribars can easily be mounted to most bikes existing extension posts or aftermarket adaptable angled risers. We also manufacture lightweight and aerodynamic adaptors for optimal angled and extended reach where necessary. The UNO tribars are provided with lightweight adaptors.
What bolt hole configurations do the aerobars fit? Both aerobars feature a blank carbon fibre mounting plate/area and shipped with a mounting guide for precision drilling. This allows for easy mounting without the need of additional bolt spacing adaptors whilst optimising rider position. Multiple positions are able to be achieved including swapping from one bike to another.
Hydration system
What is the hydration capacity of the integrated bottle? The bottles hold 1.25-1.5L depending on aerobar size.
Can I wash the integrated bottle? Yes. The aerobars package includes a specific cleaning brush for the bottle. We recommend ensuring you always rinse and allow the bottle to dry after every use and regularly use anti-bacterial bottle cleaning tabs.
Is the integrated bottle dishwasher safe? No. Please only clean the bottle with cool/room temperature water.
Is the bottle safe to drink from? Yes. The bottle is produced using high-temperature FDA approved food safe filaments and printing procedures. The bottle is then sealed using a FDA approved food safe resin. Together this ensures a high-quality finish and extends lifespan.
Can you refill the bottle during a race? Yes. The integrated bottle features an easy access tab at the front for easy refilling.
What are the purchase choices associated with the bottle? The integrated bottle has several different configuration options available. The main option is whether you'd like the hose on the left or right side of the bottle. We recommend choosing the side that you most often hold a water bottle with whilst drinking during a ride. The dual hose option is for those with bikes with an internal hydration bladder or similar that you drink with from a hose. The dual hose option then allows you to route that hose up into the integrated bottle on the opposite side to the integrated bottle's hose.
Can I order spare parts for the bottle? Yes. We offer spares for the integrated bottle including hose, connector, easy access tab and magnetic hose guides as well as the bottle itself.